HAGER ZB51S Counter cabinet univ.Z IP44
The univers Z meter cabinet with dimensions of 1400 x 300 x 205 mm and 108 space units (PLE) is the ideal solution for meter distribution systems up to 355 A with a rated voltage of 230/400 V, 50 Hz. Manufactured in accordance with DIN VDE 0603-1 and dimensional standard DIN 43870, it is suitable for surface-mounted, flush-mounted or partially recessed installation.
The housing is made of sturdy, profiled, 1 mm thick, powder-coated sheet steel. The inner lining is made entirely of plastic. Plastic flange plates are integrated at the top and bottom for cable routing. Additional knockouts on the rear and flange plates on the sides enable easy installation in the NAR, RfZ (only for 1100 mm height) and AAR areas.
The door is flush with the front and has adjustable, internal hinges. It can be hinged on the right or left and has an opening angle of 110°. The door is locked using a latch; a rod lock with three-point locking is fitted as standard on enclosures from a width of 800 mm or a height of 1250 mm. The lock can be replaced by other locking systems if required.
The degree of protection is IP31 (optionally IP44/IP54 in accordance with DIN VDE 0470-1), behind the door is IP3X. The enclosure is insulated (protection class II) and therefore offers a high level of safety.
Series connection is possible through side-by-side or stacked mounting. The system is modular and can be extended in sizes from 1 to 5 bays with 72 to 540 PLE.
Note: A connection kit (accessory) is required for a cabinet-cabinet connection. In the AAR area, the plastic flange plate can be removed to integrate an optional SCHUKO or CEE socket outlet.
WARN- UND SICHERHEITSHINWEISE:
Der Anschluss und die Installation eines elektrischen Geräts oder Bauteils, das nicht steckerfertig ist, dürfen ausschließlich von einer qualifizierten Elektrofachkraft vorgenommen werden. Bei Schäden ist das Kabel unverzüglich spannungsfrei zu schalten. Der Hersteller übernimmt keine Haftung für Schäden, die durch unsachgemäßen Gebrauch verursacht werden. Weitere Informationen zum Installationshinweis finden Sie hier.
HERSTELLER/EU VERANTWORTLICHE PERSON: