Universal distribution panel from the HAGER univers Z series. Suitable for meter cabinets in residential and functional buildings - prepared for modern metering systems and structured electrical distributions.Technical data:Design: 1-bay, 5-rowHeight: 1050 mmWidth: 250 mmDepth: approx. 96 mmMounting: On snap-in support plate, tool-freeRails: 5 top-hat rails (35 × 7.5 mm)PE/N terminals: finger-touch-proof, arranged horizontallyColour: Pure white (similar to RAL 9010)Material: Profiled, galvanised sheet steel support with plastic coversProtection class: suitable for installation in VDE-compliant meter cabinetsSpecial features:APZ room (termination point meter location) integrated in the lower areaIncluding RJ45 socket in the APZ area (pre-assembled)Preparation for smart metering systems in accordance with VDE-AR-N 4100Sealable covers with viewing windowRobust, durable design for use in distribution board constructionIdeal for expanding existing systems or in new buildsThe HAGER ZU37VT5APZ2 is a high-quality, easy-to-install distribution panel for metering systems with integrated APZ. It offers plenty of space for rail-mounted devices, fulfils current standard requirements and is ideally equipped for modern electrical installations.

Distribution panel for equipping meter cabinets, ideal for residential and commercial buildings. Suitable for accommodating DIN rail mounted devices and modular technology - part of the HAGER univers Z system.Technical data:Number of rows: 7Number of bays: 1-bayModule slots: 12 partition units (TE) per rowDimensions (HxWxD): 1050 × 250 × approx. 106 mmSupport: Galvanised sheet steel frame, stable and easy to installMounting: Top-hat rail mounting, tool-free on snap-in railPE/N terminals: horizontal, finger-safe, with plug-in technologyCover: Plastic cover, sealable, with viewing window possibleColour: Pure white (similar to RAL 9010)Protection class: IP00 (for installation in closed meter panels)Special features:Quick installation thanks to click system without toolsStandardised grid dimension for easy placement of devicesDesigned for safe, standardised wiringRobust processing for long-term use in distribution board constructionCan be optionally combined with APZ panelThe HAGER ZU37KS offers plenty of space for installations with 7 rows of 12 HP each, convenient, safe wiring and a durable design. Ideal for use in modern electrical distribution boards - from single-family homes to commercial installations.

Distribution panel for equipping meter cabinets, ideal for modern house connections. Designed for use with intelligent metering systems (iMSys) and prepared for return flow meters (RFZ) and the termination point meter location (APZ).Technical data:Number of fields: 1 fieldRows: 6 DIN rail rowsModule slots: 12 partition units (TE) per rowHeight: 1350 mmWidth: 250 mmDepth: approx. 96 mmMaterial: Sheet steel support with plastic coverColour: Pure white, similar to RAL 9010PE/N terminals: Available, arranged horizontallyMounting: Snap-in mounting without toolsCover: Sealable cover with viewing window and handleSpecial features:Integrated APZ area (300 mm deep) in the lower part of the panelRFZ area available to accommodate a return flow meterOptimised for use in meter systems in accordance with VDE-AR-N 4100Compatible with all standard Hager meter cupboard componentsStandard-compliant design for safe use in the mains connection areaQuick and easy to installThe HAGER ZU59VT6APZ2 is a versatile distribution panel with extensive features: ideal for intelligent metering systems, prepared for APZ and return flow meters, space-saving and easy to install - perfect for modern meter panel solutions in residential and commercial buildings.

Meter cabinet univers Z - 1400x800x205 mm, 324 PLE, IP44The univers Z meter cabinet measuring 1400x800x205 mm is ideal for surface-mounted, flush-mounted or partially recessed installation in accordance with DIN VDE 0603-1 and dimensional standard DIN 43870. 324 space units (PLE) make it ideal for installing a meter distribution system up to 355 A at 230/400 V and 50 Hz.The housing is made of 1 mm thick, powder-coated sheet steel with a sturdy, profiled door that sits flush with the front and can be hinged either on the right or left. The door has a 110° opening angle and a latch lock. From a width of 800 mm and for enclosure heights from 1250 mm, a rod lock with three-point locking is used.Protection class II and protection types IP31 to IP54 offer a high level of safety. Protection class IP3X applies behind the door. The inner lining is made entirely of plastic. For cable entries, there are plastic flange plates at the top and bottom, a rear pre-embossing in the plastic and side entries in the area of NAR (e.g. for busbars), RfZ (only for 1100 mm height) and AAR.The enclosure can be flange-mounted side by side and on top of each other and is available in sizes from 1 to 5 bays with 72 to 540 PLE. A SCHUKO or CEE socket outlet can optionally be installed in the AAR area.Note: A suitable connection kit (accessory) is always required to connect several enclosures.

Meter cabinet univers Z - 1100x800x205 mm, 252 PLE, IP44The univers Z meter cabinet measuring 1100x800x205 mm is ideal for surface-mounted, flush-mounted or partially recessed installation in accordance with DIN VDE 0603-1 and dimensional standard DIN 43870. With 252 space units, it supports the installation of a meter distribution system up to 355 A with a rated voltage of 230/400 V and 50 Hz.The housing is made of 1 mm thick, powder-coated sheet steel with a flush-mounted door that has internal, adjustable hinges and can be hinged on the right or left. The door can be opened through 110°. Depending on the size of the enclosure, the door is locked with a cam lock or bar lock with three-point locking.The enclosure has protection class II and fulfils protection classes IP31 to IP54. The protection class behind the door is IP3X. The inner lining is made entirely of plastic. Cable entries are located at the top and bottom via integrated plastic flange plates. There are also lateral flange plates in the area of NAR, RfZ (for 1100 mm height) and AAR.The modular design allows several enclosures to be flange-mounted next to or on top of each other. A SCHUKO or CEE socket outlet can optionally be installed in the AAR area. The enclosure sizes range from 1 to 5 bays with 72 to 540 PLE.Note: Always use a connection kit (accessory) when combining several enclosures.

The univers Z meter cabinet, measuring 1400x800x205 mm, is suitable for surface-mounted, flush-mounted or partially recessed installation. Manufactured in accordance with DIN VDE 0603-1 and dimensional standard DIN 43870, it enables the installation of a meter distribution system up to 355 A with a rated voltage of 230/400 V (50 Hz).The 1 mm thick, powder-coated sheet steel housing is robust and has a flush door with internal, adjustable hinges that can be hinged on the right or left. The door opening angle is 110°. From a width of 800 mm and a height of 1250 mm, a rod lock with three-point locking is used.The enclosure offers 324 space units (PLE) and fulfils protection class II as well as protection classes IP31 (IP44/IP54 in accordance with DIN VDE 0470-1). Protection class IP3X applies behind the door. The inner lining is made entirely of plastic. Cable entries are located at the top and bottom via integrated plastic flange plates. Further entries are available at the rear and at the side in the area of NAR, RfZ (only for 1100 mm height) and AAR.The enclosure is modularly expandable - can be flanged side by side and on top of each other - and is available in versions with 72 to 540 PLE. A SCHUKO or CEE socket outlet can be installed in the AAR area.Note: A connection kit (accessory) is required for enclosure combinations.

The univers Z meter cabinet with the dimensions 1100x1300x205 mm is designed for surface-mounted, flush-mounted or partially recessed installation in accordance with DIN VDE 0603-1 and dimensional standard DIN 43870. With 420 space units (PLE), it is ideal for setting up a meter distribution system up to 355 A with a rated voltage of 230/400 V, 50 Hz.The robust housing made of 1 mm thick, powder-coated sheet steel is sturdily profiled and has a flush door with adjustable, internal hinges. The door can be hinged on the right or left and can be opened through 110°. From a width of 800 mm and a height of 1250 mm, a rod lock with three-point locking is used.The enclosure fulfils protection class II and protection class IP31 (optionally IP44/IP54 in accordance with DIN VDE 0470-1). Protection class IP3X applies behind the door. The entire inner lining is made of plastic. Cable entries are made at the top and bottom via integrated plastic flange plates, and there are also knockouts at the rear and side entries for NAR (e.g. busbar bushing), RfZ (only for 1100 mm height) and AAR.The enclosure can be modularly combined - both side-by-side and stacked - and is available in sizes with 72 to 540 space units. A SCHUKO or CEE socket outlet can be installed in the AAR area.Note: A connection kit (accessory) is required to combine several cabinets.

The univers Z meter cabinet measuring 1400x1050x205 mm is suitable for surface-mounted, flush-mounted or partially recessed installation in accordance with DIN VDE 0603-1 and dimensional standard DIN 43870. With 432 space units (PLE), it is designed for meter distribution systems up to 355 A at a rated voltage of 230/400 V (50 Hz).The enclosure housing is made of 1 mm thick, powder-coated sheet steel with sturdy profiling. The flush door has adjustable, internal hinges and can be hinged on the right or left with an opening angle of 110°. It is locked with a latch bolt, from 800 mm width and from 1250 mm height with a rod lock with three-point locking.The enclosure fulfils protection class II and protection classes IP31 to IP54 (in accordance with DIN VDE 0470-1); IP3X applies behind the door. The inner lining is made entirely of plastic. Cable entries are located at the top and bottom via plastic flange plates, and there are further openings at the sides and rear for NAR (busbar bushing), RfZ (only for 1100 mm height) and AAR.The enclosure is modularly expandable and can be flange-mounted both side by side and on top of each other. A SCHUKO or CEE socket outlet can optionally be installed in the AAR area.Note: A connection kit (accessory) is required when combining several enclosures.

The univers Z meter cabinet with the dimensions 1100x550x205 mm and 168 space units (PLE) is suitable for the installation of a meter distribution system up to 355 A with a rated voltage of 230/400 V (50 Hz). It fulfils the requirements of DIN VDE 0603-1 and the dimensional standard DIN 43870 for surface-mounted, flush-mounted or partially recessed installation.The housing is made of sturdy, profiled, powder-coated 1 mm sheet steel. The flush-mounted door is fitted with internal, adjustable hinges and can be hinged at an angle of 110° to the right or left. The door lock is fitted with latches and is replaceable.The enclosure fulfils protection class II (protective insulation) as well as protection classes IP31 to IP54 (in accordance with DIN VDE 0470-1), behind the door IP3X. The plastic inner lining reliably protects the installed technology. Cable entries are located at the top and bottom via plastic flange plates. There are also knockouts at the rear and lateral flange plates in the area of the NAR (busbar bushing), RfZ (only for 1100 mm height) and AAR.The meter enclosure can be extended modularly - both side by side and on top of each other. A SCHUKO or CEE socket outlet can optionally be integrated in the AAR area.Note: A connection kit is required for a cabinet-cabinet connection (accessories available separately).

The univers Z meter cabinet with the dimensions 1400x1300x205 mm and 540 space units (PLE) is ideal for the installation of meter distribution systems up to 355 A with a rated voltage of 230/400 V (50 Hz). The design complies with DIN VDE 0603-1 and the dimensional standard DIN 43870 for surface-mounted, flush-mounted or partially recessed installation.The robust housing is made of 1 mm thick, powder-coated sheet steel with an inner lining of high-quality plastic. The door is flush-mounted and has adjustable hinges on the inside. It can be hinged on the right or left and offers an opening angle of 110°.Protection class II (protective insulation) provides additional safety. The enclosure offers protection class IP31 (or IP44/IP54 in accordance with DIN VDE 0470-1) and IP3X behind the door. Cable entries are realised by built-in plastic flange plates at the top and bottom. Additional knockouts are located on the rear. Plastic flange plates are fitted at the sides in the area of the NAR (e.g. for busbar bushing), RfZ (at 1100 mm height) and AAR.The door is locked using a sash lock. From a width of 800 mm and a height of 1250 mm, the enclosure is equipped with a rod lock and three-point locking. Locking systems can be exchanged individually.The enclosure can be flanged side by side and on top of each other and is available as a 1 to 5 bay version - with a total of up to 540 storage units.Note: A connection kit is required to connect several enclosures (available as an accessory). In the AAR area, the flange plate can be removed and a SCHUKO or CEE socket outlet can be integrated.

The univers Z meter cabinet in the compact size 1100x300x205 mm with 84 space units (PLE) is suitable for the installation of meter distribution systems up to 355 A with a rated voltage of 230/400 V (50 Hz). In accordance with DIN VDE 0603-1 and dimensional standard DIN 43870, it is suitable for surface-mounted, flush-mounted or partially recessed installation.The sturdy housing is made of 1 mm thick, powder-coated sheet steel. The inner lining is made entirely of high-quality plastic. The enclosure has cable entries at the top and bottom with built-in plastic flange plates and knockouts at the rear. Flange plates are located on the sides in the area of NAR (e.g. busbar bushing), RfZ (only for 1100 mm height) and AAR.The door is flush with the front, fitted with internal, adjustable hinges and can be hinged either on the right or left. It offers a 110° opening angle. The door is locked using a latch and can be replaced by other locking systems if required.The enclosure offers protection class IP31 and optionally IP44 or IP54 in accordance with DIN VDE 0470-1. Protection class IP3X is provided behind the door. Protection class II (protective insulation) ensures increased safety.It can be mounted side by side or on top of each other. The meter cabinet is available in sizes from 1 to 5 bays with 72 to 540 PLE.Note: A connection kit (accessory) is required for a cabinet-cabinet connection. In the AAR area, a plastic flange plate can be removed to integrate an optional SCHUKO or CEE socket outlet.

The univers Z meter cabinet with dimensions of 1400 x 300 x 205 mm and 108 space units (PLE) is the ideal solution for meter distribution systems up to 355 A with a rated voltage of 230/400 V, 50 Hz. Manufactured in accordance with DIN VDE 0603-1 and dimensional standard DIN 43870, it is suitable for surface-mounted, flush-mounted or partially recessed installation.The housing is made of sturdy, profiled, 1 mm thick, powder-coated sheet steel. The inner lining is made entirely of plastic. Plastic flange plates are integrated at the top and bottom for cable routing. Additional knockouts on the rear and flange plates on the sides enable easy installation in the NAR, RfZ (only for 1100 mm height) and AAR areas.The door is flush with the front and has adjustable, internal hinges. It can be hinged on the right or left and has an opening angle of 110°. The door is locked using a latch; a rod lock with three-point locking is fitted as standard on enclosures from a width of 800 mm or a height of 1250 mm. The lock can be replaced by other locking systems if required.The degree of protection is IP31 (optionally IP44/IP54 in accordance with DIN VDE 0470-1), behind the door is IP3X. The enclosure is insulated (protection class II) and therefore offers a high level of safety.Series connection is possible through side-by-side or stacked mounting. The system is modular and can be extended in sizes from 1 to 5 bays with 72 to 540 PLE.Note: A connection kit (accessory) is required for a cabinet-cabinet connection. In the AAR area, the plastic flange plate can be removed to integrate an optional SCHUKO or CEE socket outlet.